Million In One Mitt
A NEW TOOL MADE OF HIGH QUALITY, COMMERCIAL FINISHING MATERIAL FOR CLEANING, POLISHING, SANDING, REFURBISHING, CREATING AND MAINTAINING MANY DIFFERENT FINISHES ON NUMEROUS ITEMS MADE OF ALL DIFFERENT MATERIALS, NOT TO BE CONFUSED WITH SUPERMARKET POT SCRUBBERS!
Available in White/Gray. Gray/Maroon and White/White.
The white and gray pads make the lite-weight mitt
The gray and maroon pads make the heavy-weight mitt
The white and white pads are super lite and are used for general cleaning and polishing
Please note: All of the mitts can be used for many different applications, always test a small area to make sure the desired results are achieved before doing large areas.
The white side is a very fine
abrasive material used for general cleaning and polishing of surfaces. The gray side is a fine abrasive that is used for medium cleaning of non-high
gloss finishes on surfaces, creating a semi-gloss finish, or for fine sanding when painting or finishing before final higher gloss coats are applied. The maroon side is a medium abrasive that is used for heavy cleaning, medium
sanding tasks and creating a matte finish .
The flexibility of the mitt, enables it to be used on any shape surface. The mitt's material becomes softer to one's hands and more flexible once it is used wet or rinsed in hot water. The unique design, with two thumb holes, allows the use of either side of the mitt on your left or right hand. The strap keeps the mitt on mops, brushes, shoes or your foot. Extend the cuts above the strap to fit the mitt over your feet, shoes or brushes. A mitt can be cut in half for smaller jobs at different places. A worn mitt can be turned inside out for extended life. The mitt is like super fine steel wool but will not rust or like fine sandpaper that will not fall apart. Soiled mitts can be soaked in detergents or solvents to remove caked on grease and grime or cleaned in a washing machine.
